ADD: Changfu Industrial Zone, Xiamei Town, Nan'an City, Quanzhou City, Fujian Province

TEL: 400-012-3353

PAGE COPYRIGHT © 2019 Fujian Baofeng Electronics Co., Ltd ALL RIGHTS RESERVED.  闽ICP备12007283号 Powered by www.300.cn

-
-
-
The main performance indicators and meaning of the walkie-talkie
Baofeng dynamic
Industry News
Leader inspection
Media report

NEWS INFORMATION

The main performance indicators and meaning of the walkie-talkie

Classification:
Industry News
Author:
Source:
2016/11/25 10:55
Page view
Review:
[Abstract]:
Frequency error: The difference between the unmodulated carrier frequency and the assigned frequency.

The main performance indicators and meaning of the walkie-talkie

 

transmitter:

Frequency error: The difference between the unmodulated carrier frequency and the assigned frequency.

Output carrier power: The average power of the transmitting rack to the transmission line in one RF cycle without modulation. Indicates the amount of energy emitted by the machine.

Spurious radio frequency component: A signal having a significant component on a discrete frequency or in a narrow frequency band, in addition to the modulation component at the vicinity of the carrier and its transmission bandwidth. Includes harmonic and non-harmonic and parasitic components.

Adjacent channel power: The portion of the total output power that falls within the specified bandwidth of any adjacent channel under the specified modulation conditions for the transmitter operating in a channel-divided system.

Audio Distortion: The ratio of the rms value of the uncorrupted chord signal whose fundamental component is removed to the rms value of the full signal, expressed as a percentage. This distorted sinusoidal signal includes harmonic components, power supply ripple, and non-harmonic components. .

Modulation Limit: The transmitter audio circuitry prevents the modulation from exceeding the maximum allowable offset.

 

Receiver:

Rated audio output power: The power available when the receiver is connected to a specified load at the specified operating conditions.

Reference Sensitivity: Also known as the maximum available sensitivity, the input signal level at the receiver output produces a standard signal-to-noise ratio (12dBSINAD) at a specified frequency and modulation.

Selectivity: Characterizes the receiver's ability to resist input signals with input signals. It is evaluated by measuring the performance of adjacent signal selectivity, co-channel rejection, blocking, spurious response, and intermodulation immunity.

 

Signaling:

CTCSS: CTCSS (Continuous Tone Coded Squelch System) is a technology that adds a frequency lower than the audio frequency (67-250.3 Hz) to the audio signal. Because its frequency range is below standard audio, that is, less than 300 Hz, it is called sub-audio.

Sound digital: CDCSS (Continuous Digital Coded Squelch System), consisting of a code group, is issued cyclically. Its transmission rate is 134.4HZ, because it is also less than 300HZ, so it is called sub-tone digital. There are typically 104 sets of digital codes. Its function is the same as CTCSS, except that it is digitally encoded as a condition for whether mute is turned on.

 

Dual tone multi-frequency:

DTMF (dual tone multi frequency) consists of a high frequency group and a low frequency group, and the high and low frequency groups each contain four frequencies. A high frequency signal and a low frequency signal are superimposed into a combined signal, representing a number. The high and low frequency groups can be combined into 16 combined signals representing 0-9, *, #, A, B, C, and D, respectively.

Key words: